Industrial Thin ITX Mainboard ITX-B345_J112L J3455
Product number:ITX-B345_J112L VER:1.0(J3455)
Processor:Integrated Intel Celeron J3455 1.5GHz quad-core processor, TDP power Consumption :10W
Chipset:Compatible with Intel Apollo Lake Celeron/Pentium low power processor
RAM:SOC
Show:1*DDR3L SODIMM, support dual channel 1600/1866MHz 1.35V memory, maximum support 8GB
Integrated Intel HD Graphics 500 core graphics card
1*VGA, 1*HDMI, 1*LVDS interface (support dual channel 24Bit) or 1*EDP interface
The internet:Support VGA, HDMI, LVDS synchronous/asynchronous display
Store:1* RTL8111H Gigabit Ethernet chip, support Wake-on-LAN/PXE function
1* 7pin SATA3.0 hard disk interface, transfer rate up to 6Gbps
1* MSATA slot, support SSD transfer speed up to 6Gbps,
Audio:1* M.2 slot, support M.2 2280 NVME PCIE standard SSD
Onboard ALC662 6-channel high-fidelity audio controller, support MIC/Line-out.
Expand:The power amplifier is recommended to use 2Ω5W speakers
Backplane I/O interface :1* Mini-PCIE slot supports WIFI/3G module
2* USB3.0 interface
1* HDMI1.4 interface
1* VGA DB15 interface
1* RJ-45 Gigabit network interface
1* Line out (green)
1* Mic (red)
Built-in I/O interface :1* 12V DC power input interface
1* LVDS interface 2*15pin, support dual channel 24Bit LCD Display:
1* screen backlight power supply interface (1*6pin)
1* Screen brightness adjustment interface 1*4pin
1* EDP interface 2*15pin, (optional) and LVDS alternative
1* HDMI interface 2*8Pin, the same signal as the HDMI interface On the back panel :
1* JVGA interface 1*12pin, the same signal as DB15
2* RS232 serial port, COM2 can support RS485, COM1/COM2 Supports the 9th pin charged function
1* LPT interface 2*13pin
8* USB2.0 interface, 2*5pin
1* Front panel audio interface 2*5pin
1* SIM card holder
1* Hard disk power supply interface, 1*4pin
1* Front panel function button and indicator port 2*5pin
2* 2pin ATX power connector, can be used as +12V input and output
Fan interface:1* power amplifier interface 1*4pin
GPIO:Fanless cooling, reserved 1* 4pin CPU smart fan interface, 1*4pin system fan interface
BIOS:Support 4 input and output GPIO
Watchdog:64Mb Flash ROM
Power type:Support hardware reset function (256 levels, 0~255 seconds)
Operating temperature:DC 12V single power input
Storage temperature:-10℃~60℃
Working humidity:-20℃~70℃
Size:5%-95% relative humidity, non-condensing
Processor:Integrated Intel Celeron J3455 1.5GHz quad-core processor, TDP power Consumption :10W
Chipset:Compatible with Intel Apollo Lake Celeron/Pentium low power processor
RAM:SOC
Show:1*DDR3L SODIMM, support dual channel 1600/1866MHz 1.35V memory, maximum support 8GB
Integrated Intel HD Graphics 500 core graphics card
1*VGA, 1*HDMI, 1*LVDS interface (support dual channel 24Bit) or 1*EDP interface
The internet:Support VGA, HDMI, LVDS synchronous/asynchronous display
Store:1* RTL8111H Gigabit Ethernet chip, support Wake-on-LAN/PXE function
1* 7pin SATA3.0 hard disk interface, transfer rate up to 6Gbps
1* MSATA slot, support SSD transfer speed up to 6Gbps,
Audio:1* M.2 slot, support M.2 2280 NVME PCIE standard SSD
Onboard ALC662 6-channel high-fidelity audio controller, support MIC/Line-out.
Expand:The power amplifier is recommended to use 2Ω5W speakers
Backplane I/O interface :1* Mini-PCIE slot supports WIFI/3G module
2* USB3.0 interface
1* HDMI1.4 interface
1* VGA DB15 interface
1* RJ-45 Gigabit network interface
1* Line out (green)
1* Mic (red)
Built-in I/O interface :1* 12V DC power input interface
1* LVDS interface 2*15pin, support dual channel 24Bit LCD Display:
1* screen backlight power supply interface (1*6pin)
1* Screen brightness adjustment interface 1*4pin
1* EDP interface 2*15pin, (optional) and LVDS alternative
1* HDMI interface 2*8Pin, the same signal as the HDMI interface On the back panel :
1* JVGA interface 1*12pin, the same signal as DB15
2* RS232 serial port, COM2 can support RS485, COM1/COM2 Supports the 9th pin charged function
1* LPT interface 2*13pin
8* USB2.0 interface, 2*5pin
1* Front panel audio interface 2*5pin
1* SIM card holder
1* Hard disk power supply interface, 1*4pin
1* Front panel function button and indicator port 2*5pin
2* 2pin ATX power connector, can be used as +12V input and output
Fan interface:1* power amplifier interface 1*4pin
GPIO:Fanless cooling, reserved 1* 4pin CPU smart fan interface, 1*4pin system fan interface
BIOS:Support 4 input and output GPIO
Watchdog:64Mb Flash ROM
Power type:Support hardware reset function (256 levels, 0~255 seconds)
Operating temperature:DC 12V single power input
Storage temperature:-10℃~60℃
Working humidity:-20℃~70℃
Size:5%-95% relative humidity, non-condensing
